View source for Modify the LatticeMico8 Tutorial (lm8 1 4 tutor.pdf) for the MachXO2 Pico Development Kit

=Change the device type for the build process=

In Task 1 Step 6, set the device according to the one installed in the Pico board:


a. In the Family box, select MachXO2.
 
b. In the Device box, select LCMXO2-1200ZE.
 
c. In the Part Names box, select LCMX02-1200ZE-2MG132C.



The speed grade should populate with the proper grade of 2.

d. In the Package Type box, select CSBGA132.

e. In the Operating Conditions box, select Commercial.



=Tutorial Errata=

Correction for the tutorial:

Figure 22 shows an incorrect path for the MSB System. It does not show the lm8_tutor folder preceeding the platform1 sub-folder. 							 							 						


=Change the Demo Code=

Later, we will change the demo LED toggle C code to either toggle IO pins (readable with a scope) or control the LCD display instead.